Dës Säit gouf iwwersat iwwer Google iwwersetzt

Ausrüstungspezifikatioun Bibliothéik

Basismodell Informatiounen

  • Fabrikant:
    Vermeer
  • Modell:
    D10x15
  • Ausrüstung Gréisst:
    0 - 10,000 lbs Pullback

dem Produzenten kucken Modellen kucken

Spezifikatiounen

Manufacturer's Gross HP Rating 50 hp 37.3 kw
Fluid Tank 55 gal 208.2 L
Min Bend Radius 29.1 m
Pump Pressure 750 psi
Rated Engine RPM 3000 rpm 3000 rpm
Pipe Diameter 1.66” 4 cm
Max Spindle Speed 180 rpm 180 rpm
Pump Output 13.5 gpm
Max Carriage Speed 90 ft/min 27.4 m/min
Width 35.5'' 91cm
Min Bore Diameter 3" 7.6 cm
Length 10 Ft. 3 m
Engine Perkins
Rod Loader yes - optional
Joint Diameter 42 mm
Rod Carrying Capacity 440'
Ground Drive Speed 1.5 mph 2.4 km/h
Weight 17 kg
Drill Stem 10' 0'' 3m
Entry Angle 16 degrees
Max Flow 13.5 gpm 51.1 L/min
Pullback 10000 lbs 4535.9 kg
Thrust 10000 lbs 4535.9 kg
Max Pressure 750 psi 51.7 bar
Weight 8980 lbs 4073.3 kg
Fuel Tank Capacity 17 gal 64.4 L
Length 15' 8'' 478 cm
Hydraulic Tank Capacity 23 gal 87.1 L
Height 86.5'' 219.7 cm
Make and Model Perkins
Type Forged

Zousätzlech Informatioun

Oil-well drilling installation
Length: 478 cm
Width: 91 - 124 cm
with linkage change mechanism: 107 - 124 cm
Height (in operating position): 219.7 cm
Operating weight
with linkage box: 3447 kg
with linkage box and
autom. Linkage change-over switch: 3946 kg
hydr. Tightening device: Yes
Driving speed: 2,4 km/h
integrated drill pipes: Yes
autom. Linkage change-over switch: (optionally)
stationary anchoring system: Yes
Work slip thrower: Yes

Operational data
max. Number of revolutions: 180 U/min.
max. Torque: 2031 Nm
effect. Feed motion u. Pull-back power: 4536 kg
electrical. System: 12 V

Suspension system
Option 1:
max. Mechanical handling capacity: 51.10 l/min.
Option 2:
Use of other high pressure suspension plants
possible.

Drive
Engine: Perkins®
Achievement: 50 PS/37 KW
max. Revolutions: 3000 U/min.

Drill pipes
one-piece forged: Yes
Single length: 3 m
Diameter: 42 mm
Bending radius: 29.1 m
Weight: 17 kg

Drilling parameter
min. Hole diameter: 80 mm
The drilling head works with all well-known
Detection systems.
max. Drilling length varies *)
*) Dependent on ground condition,
Hole diameter and weight too
shifting product.

Amount of filling
Hydraulic oil: 87 l
Engine oil inclusive. Filter 8.2 l
Fuel: 64 l

---------------------

DIMENSIONS AND WEIGHTS
Weight: 8980 lbs (4073.3 kg)

ENGINE
Make and Model: Perkins
Maximum Engine RPM: 3000 rpm
Gross Horsepower: 50 hp (37.3 kw)
Net Horsepower: 47 hp (35.1 kw)

OPERATIONAL
Thrust: 10000 lbs (4535.9 kg)
Pullback: 10000 lbs (4535.9 kg)
Maximum Carriage Speed at Maximum Engine RPM: 90 ft/min (27.4 m/min)
Maximum Spindle Speed at Max Engine RPM: 180 rpm
Minimum Bore Diameter: 3 " (7.6 cm)
Maximum Ground Drive Speed at Maximum Engine RPM: 1.5 mph (2.4 km/h)
Automated Rod Loader: Yes- optional
Drill Rack Angle: 16 deg

FLUID CAPACITIES
Fuel Tank: 17 gal (64.4 L)
Engine Crankcase with Filter: 8.7 qt (8.2 L)
Hydraulic Tank: 23 gal (87.1 L)
Drilling Fluid System Option One
Maximum Flow: 13.5 gpm (51.1 L/min)
Maximum Pressure: 750 psi (51.7 bar)
On Board Tank Capacity: 55 gal (208.2 L)

FEATURES
Breakout System: Hydraulic - open top
Stakedown System: Yes - stationary

dem Produzenten kucken Modellen kucken

Dës Informatioun gëtt nëmmen fir informell Zwecker zur Verfügung gestellt. HDD Broker LLC kann net garantéieren d'Genauegkeet oder Vollständegkeet vun dësen Informatiounen. Dës Informatioun kann mam Wënzer änneren. Verschidde Spezifikatioune kënnen tëschent dem Modelljoer variéieren.

HDD Broker benotzt Cookien an sammelt perséinlech Informatioune fir seng Websäiten.

Fir méi ze léieren, préifen d'HDD Broker d'Privatsphärpolitik an d'Cookie-Politik. Wann Dir op "I Accept" klickt, kënnt Dir uginn datt Dir Är Browserinstellungen ugepasst hutt fir Är Präferenzen anzestellen an d'Cookie vum HDD Broker ze benotzen.

x