Zoumaachen

• Fabrikant:
  Vermeer
• Modell:
  D40x55DR S3
• Ausrüstung Gréisst:
  30,001 - 50,000 lbs pullback

GENERAL WEIGHTS AND DIMENSIONS
Min transport length: 256" (650 cm)
Max operational length: 296" (752 cm)
Min transport width: 89" (226 cm)
Max operational width: 120" (305 cm)
Min transport height: 110" (279 cm)
Max operational height: 118" (300 cm)
Max weight: 31500 lb (14288 kg)
Angle of approach: 23 deg
Angle of departure: 19 deg

OPERATIONAL
Thrust rod: 40,000 lb (177.9 kN)
Pullback rod: 40,000 lb (177.9 kN)
Max carriage speed at max engine rpm - fpm (m/min): 115 fpm (35.1 m/min)
Max spindle torque (max engine rpm) - ft-lb (Nm): 5500 ft-lb (7458 Nm)
Max spindle speed at max engine rpm - (rpm): 199 rpm
Min bore diameter: 6.25" (15.9 cm)
Max ground drive speed at max engine rpm - mph: 2.7 mph (4.3 km/h)
Noise level at operator’s ear: 80 dB(A)
Guaranteed sound power engine: 104 dB(A)

ENGINE OPTION ONE
Make and model: John Deere
Fuel type: Diesel
Max engine rpm: 2400 rpm
Gross horsepower: 140 hp (104 kW)
Aspiration at full engine load: Turbocharged
Max fuel consumption: 7.56 gph (28.6 lph)
Emissions rating: Tier 4 Final (EU Stage lV)
Max operating angle (fore/aft): 30 continuous/45 intermittent
Max operating angle (left/right): 30 continuous/45 intermittent

ENGINE OPTION TWO
Make and model: John Deere PowerTech 4045H275
Fuel type: Diesel
Max engine rpm: 2400 rpm
Gross horsepower: 140 hp (104 kW)
Aspiration at full engine load: Turbocharged
Max fuel consumption: 7.56 gph (28.6 lph)
Emissions rating: Tier 3 (EU Stage IllA)
Max operating angle (fore/aft): 30 continuous/45 intermittent
Max operating angle (left/right): 30 continuous/45 intermittent

DRILL PIPE - DUAL
Min bend radius: 169' (52 m)
Rod carrying capacity: 500' (152 m)
Length: 10' (3 m)
Drill rod (inner): Forged, hex connection
Drill rod (inner) - joint diameter: 1.88" (5 cm)
Drill rod (inner) - pipe diameter: 1.66" (4 cm)
Drill rod (inner) - weight: 40 lb (18.2 kg)
Drill rod (inner) - joint inside diameter: .75" (1.9 cm)
Drill rod (outer): Firestick - #750
Drill rod (outer) - joint diameter: 3.31" (8 cm)
Drill rod (outer) - pipe diameter: 2.63” (7cm)
Drill rod (outer) - weight: 86 lb (39 kg)
Drill rod (outer) - joint inside diameter: 2.06" (5 cm)

FLUID CAPACITIES
Fuel tank: 45 gal (170.1 L)
Hydraulic system: 65 gal (245.7 L)

DRILLING FLUID SYSTEM ONE
Max flow: 70 gpm (264.6 lpm)
Max pressure: 900 psi (60.2 bar)

FEATURES
Breakout system: Sliding, open top vise
Drilling lights: Standard
Flow indicator: Mud flow indicator
Stakedown system: Standard aggressive
Cab: Standard
Strike alert: Standard
Remote lockout: Standard