Zoumaachen

• Fabrikant:
  Vermeer
• Modell:
  SC252

KEY FEATURES

-Equipped with a 27 hp (20.1 kW) Kohler diesel engine on a narrow 89 cm footprint, the Vermeer SC252 brings power to backyard stumps.

-The Vermeer SC252 also features the Yellow Jacket Cutter System, engineered to provide faster, easier serviceability, as well as extend pocket and tooth life.

-The SC252 optional hydraulic front steer features an oscillating axle for mobility, specially designed steering for tighter turns, an easily accessible single-lever control, and hardened steel pivot pins and bushings.

GENERAL
-Length: 115" (292.1 cm)
-Width: 35" (88.9 cm)
-Height: 53" (134.62 cm)
-Overall Height Transport: 53" (134.62 cm)
-Weight - Engine Option One: 1040 lbs (471.74 kg)
-Weight With Dual Wheel Option (Additional): 14.5 lbs (6.53 kg)
-Width with Dual Wheel Option (Additional): 49.5" (125.73 cm)
-Sound Power: 103 dB(a)

ENGINE OPTION ONE
-Make and Model: Kohler Command
-Number of Cylinders: 2
-Gross Horsepower (Maximum): 27 hp (20.13 kw)
-Torque (Max): 42.7 ft-lb (58.07 Nm)
-Fuel Tank Capacity: 6 gal (22.71 L)
-Max Fuel Consumption: 2.4 gph (9.08 lph)
-Fuel Type: Gas
-Air Cleaner: Dry type safety element and restriction indicator
-Oil Filter: Spin on
-Recommended Oil: 10W30 Kohler
-Oil Volume with Filter 2 qt (1.89 L)
-Maximum Angle of Continuous Operation: 21 deg
-Cooling Medium: Air
-Clutch Type: Electric clutch with brake

CUTTERWHEEL SYSTEM
-Cutterwheel Diameter without Teeth: 16" (40.64 cm)
-Cutterwheel Thickness: 0.5" (1.27 cm)
-Cutterwheel Speed: 1300 rpm
-Cutterwheel Straight Line Dimension: 39" (99.06 cm)
-Cutterwheel Cut Above Ground: 25" (63.5 cm)
-Cutterwheel Cut Below Ground: 13" (33.02 cm)
-Tooth Description: Yellow Jacket Cutting System
-Number of Teeth: 16
-Number of Indexes: 2
-Number of Pockets: 16
-Reversible Pockets: 16
-Cutterwheel Guard: Standard
-Chip Containment: 7.7 cu ft (0.23 cu m)

CUTTERWHEEL DRIVE COMPONENTS
-Belt Type: Dual "A" Section
-Number of Primary Belts: 1
-Jackshaft Dimension: 1.5
-Jackshaft Bearing Type: Pillow block
-Bearing Dimensions: 1.25" (3.18 cm)
-Number of Secondary Belts: 1
-Cutterwheel Shaft: 1.5

HYDRAULIC SYSTEM
-Tank capacity: 2.8 gal (10.61 L)
-Recommended Oil Type: Vermeer VMF
-System Type: Open
-Filtration Method: 6 micron, full flow return; suction strainer
-Pump Flow at Maximum RPM: 3 gpm (11.36 L/min)
-System relief pressure: 1500 psi (103.42 bar)
-Flow Control: Standard
-Directional Control: Yes
-Oil Cooler: Yes

ELECTRICAL SYSTEM
-System Voltage: 12
-Battery: 405
-Standard Gauges: Hourmeter
-Warning Lights: Clutch and operator presence
-Switches: Clutch
-Controller: Vermeer ACS
-Shutdown System: Low engine oil pressure shutdown

CHASSIS
-Frame Description: 3" x 3 " x 3/16 " (7.62 cm x 7.62 cm x 0.48 cm)
-Boom: 4" x 4 " x 3/16" (10.16 cm x 10.16 cm x 0.48 cm)
-Control Station Description: Fixed
-Toolbox Description: Standard
-Hitch Type: Adaptor for TLR-22, 25
-Steerable Axle Type: Manual
-Tires - Option One: 5.70-8, optional duals
-Tires - Standard: 5.7x8
-Tires - Floatation: 5.7x8 duals

OTHER OPTIONS
-Special Paint Optional

OPERATOR PRESENCE SYSTEM
-Visual Interface: Dual indicator lights for operator hand contact and cutterwheel engaged