Zoumaachen

• Fabrikant:
  Vermeer
• Modell:
  D20x22FX Series II
• Ausrüstung Gréisst:
  10,001 - 20,000 lbs pullback

GENERAL
Length (min transport): 221" (561.3 cm)
Width (min transport): 65" (165.1 cm)
Height (min transport): 87" (221 cm)
Weight: 13,200 lb (5987.4 kg)
Rack angle (min, flat surface): 18 deg
Rack angle (max, flat surface): 90 deg

ENGINE
Make and model: Kubota V3800
Fuel type: Diesel
Manufacturer’s gross hp rating: 83 hp (61.9 kW)
Rated engine RPM: 240
Rated RPM: 2400 rpm
Gross Horsepower: 83 hp (61.9 kw)
Displacement: 230 cu-in (3.8 L)
Number of Cylinders: 4
Cooling Method: Liquid
Aspiration: Turbocharged
Max Fuel Consumption: 4.2 gph (15.9 Iph)
Air Cleaner: Donaldson
EPA Certification Family: Tier 3
Maximum Operating Angle (Fore/Aft)*: 20
Maximum Operating Angle (Left/Right)*: 20

FLUID CAPACITIES
Fuel tank capacity: 25 gal (94.6 L)
Hydraulic tank capacity: 23 gal (87.1 L)
Engine Crankcase with Filter: 9 qt (8.5 L)
Hydraulic System: 33 gal (124.9 L)
Engine Cooling System: 16 qt (15.1 L)
Antifreeze Tank Capacity: 2.5 gal (9.5 L)

OPERATIONAL
Thrust: 20,000 lb (9071.9 kg)
Pullback: 20,000 lb (9071.9 kg)
Maximum Carriage Speed at Maximum Engine RPM: 135 ft/min (41 .2 m/min)
Maximum Spindle Torque (Low at Maximum Engine RPM): 2200 ft-lb (2982.8 Nm)
Maximum Spindle Torque (High at Maximum Engine RPM): 1430 ft-lb (1938.8 Nm)
Maximum Spindle Speed at Max Engine RPM: 208 rpm
Min bore diameter: 3.5" (8.9 cm)
Maximum Ground Drive Speed at Maximum Engine RPM: 2.2 mph (3.5 km/h)
Automated Rod Loader: Yes
Noise Level at Operator's Ear: 90

ELECTRICAL SYSTEM
Voltage: 12
Battery Group Class: 31

DRILLING FLUID SYSTEM
Max flow: 25 gpm (94.6 L/min)
Max pressure: 750 psi (51.7 b

DRILLING FLUID SYSTEM (OPTIONAL)
Max flow: 100 gpm (378.5 L/min)
Max pressure: 300 psi (20.7 bar)

DRILL STEM
Type: Firestick
Length: 10' (3 m)
Joint diameter: 2.25" (5.7 cm)
Pipe diameter: 2.06" (5.2 cm)
Weight: 57 lb (25.9 kg)
Min bend radius: 101.9' (31.1 m)
Rod carrying capacity: 210' (64 m)
Joint inside diameter: .95" (2.4 cm)

HYDRAULIC SYSTEM
Auxiliary Pump Flow at Maximum Engine RPM: 24 gpm
Auxiliary Pump Relief Pressure: 3300 psi (227.5 bar)
Thrust/Pullback Pump Flow at Max Engine RPM: 33 gpm (124.9 L/min)
Thrust/Pullback Pump Relief Pressure: 3335 psi (229.9 bar)
Rotation Pump Flow at Maximum Engine RPM: 33 gpm (124.9 L/min)
Rotation Pump Relief Pressure: 3335 psi (229.9 bar)
Hydraulic Supply Filter Rating: 6
Hydraulic Return Filter Rating: 200

FEATURES
Drilling Lights: No
Stakedown System: Yes
Cab: Optional soft cab