Dës Säit gouf iwwersat iwwer Google iwwersetzt

Ausrüstungspezifikatioun Bibliothéik

Basismodell Informatiounen

  • Fabrikant:
    Ditch Witch
  • Modell:
    JT922
  • Ausrüstung Gréisst:
    0 - 10,000 lbs Pullback

dem Produzenten kucken Modellen kucken zréck op d 'Lëscht

Spezifikatiounen

Pullback 9000 lbs 40 kN
Rated Engine RPM 2300 rpm 2300 rpm
Fluid Tank 40 gal 151 L
Min Bend Radius 105' 32 m
Length 146" 3.7 m
Number of Cylinders 4
Fuel Tank Capacity 19 gal 72 L
Width 48" 1.22 m
Displacement 189 in3 3.1 L
Hydraulic Tank Capacity 18 gal 68 L
Max Spindle Torque 1100 ft-lbs 1491 Nm
Pipe Diameter 1.58" 40 mm
Entry Angle 10-14°
Max Spindle Speed 186 RPM 186 RPM
Weight 29 lbs 13 kg
Thrust 9000 lbs 40 kN
Min Bore Diameter 3" 76 mm
Height 74" 1.88 m
Max Flow 9 gpm 34 L/min
Weight 7100 lbs 3221 kg
Max Pressure 750 psi 52 bar
Make and Model Deutz F4L2011
Engine Cooling System Integrated Oil Integrated Oil
Fuel Type Diesel
Length 72" 1.83 m
Manufacturer's Gross HP Rating 53.5 hp 37.3 kW
Joint Diameter 2" 51 mm

Zousätzlech Informatioun

UPDATED JANUARY 2016

DIMENSIONS
Overall machine length: 146 in (3.7 m)
Overall machine width: 48 in (1.22 m)
Overall machine height: 74 in (1.88 m)
Operating weight (water tank full, 50 drill pipes): 7100 lb (3221 kg)
Entry angle: 10° to 14°
Angle of approach: 18°

POWER PIPE
Length of drill pipe, nominal: 72 in (1.83 m)
Diameter of drill pipe tool joint end: 2 in (51 mm)
Diameter of drill pipe: 1.58 in (40 mm)
Minimum bend radius: 105 ft (32 m)
Weight of drill pipe (lined): 29 lb (13 kg)

OPERATION
Maximum spindle speed: 186 rpm
Maximum spindle torque: 1100 ft/lb (1491 Nm)
Carriage thrust travel speed: 188 fpm (57 m/min)
Carriage pullback travel speed: 188 fpm (57 m/min)
Thrust force: 9000 lb (40 kN)
Pullback force: 9000 lb (40 kN)
Bore diameter: 3 in (76 mm)
Backream diameter: Soil dependent

POWER
Engine: Deutz F4L2011
Fuel: Diesel
Cooling medium: Integrated oil
Injection: Direct
Aspiration: Natural
Number of cylinders: 4
Displacement: 189 in3 (3.1 L)
Bore: 3.7 in (94 mm)
Stroke: 4.4 in (112 mm)
Manufacturer's gross power rating: 53.5 hp (37.3 kW)
Rated speed: 2300 rpm
Emissions Compliance: EPA Tier 4i (EU Stage IIIa)

DRILLING FLUID SYSTEM (ONBOARD)
Drilling fluid pressure, max.*: 750 psi (52 bar)
Drilling fluid flow, max.*: 9 gpm (34 L/min)
Drilling fluid flow, max. (large pump)*: 13 gpm (49 L/min)
Fluid tank capacity: 40 gal (150 L)

FLUID CAPACITIES
Fuel tank: 19 gal (72 L)
Hydraulic reservoir: 18 gal (68 L)

BATTERY
SAE reserve capacity rating: 165 min
SAE cold crank rating @ 0° F (-18° C): 875 A

Specifications are general and subject to change without notice.

dem Produzenten kucken Modellen kucken zréck op d 'Lëscht

Dës Informatioun gëtt nëmmen fir informell Zwecker zur Verfügung gestellt. HDD Broker LLC kann net garantéieren d'Genauegkeet oder Vollständegkeet vun dësen Informatiounen. Dës Informatioun kann mam Wënzer änneren. Verschidde Spezifikatioune kënnen tëschent dem Modelljoer variéieren.

HDD Broker benotzt Cookien an sammelt perséinlech Informatioune fir seng Websäiten.

Fir méi ze léieren, préifen d'HDD Broker d'Privatsphärpolitik an d'Cookie-Politik. Wann Dir op "I Accept" klickt, kënnt Dir uginn datt Dir Är Browserinstellungen ugepasst hutt fir Är Präferenzen anzestellen an d'Cookie vum HDD Broker ze benotzen.

x