Fermer

• Fabricant:
  Ditch Witch
• Modèle:
  410SX

DIMENSIONS
Transport height (top of raised plow): 58 in
Transport height (top of 2' boom & chain): 63.5 in
Angle of departure w/o blade: 39°
Angle of departure with 18 in. blade: 17°
Maximum length plowing without trenching attachments: 118 in
Maximum length plowing with trenching attachments: 151 in
Width, plow unit: 23 in
Width Transport
(23x10.50-12 tires): 36 in
(23x10.50-12 dual wheels): 56 in
(26x12-12 tires): 44.5 in
Blade ground clearance (18" blade): 26 in
Maximum cover depth: 24 in
Operating height (w/o trenching attachment): 49.5 in
Tread (23x10.50-12 tires): 25.5 in
Tread (26x12-12 tires): 33.5 in
Wheelbase: 46 in
Centerline plow to outside edge of machine, blade centered
(23x10.50-12 tires): 18 in
(26x12-12 tires): 22 in
Angle of approach w/trenching attachment: 21°
Angle of approach w/o trenching attachment: 22°

OPERATIONAL
Vehicle speeds @ 2500 rpm
Maximum transit forward
(26x12-12 tires): 2.4 mph
Maximum transit reverse
(23x10.50-12 tires): 1.0 mph
(26x12-12 tires): 1.3 mph
Maximum pipe or cable diameter, pull type plow blade: 3 in
Feed type plow blade inside chute diameter: 1 in
Vehicle clearance circle, wall to wall (equipped with trenching attachment and 18" plow blade)
Right Turn (23x10.50-12 tires): 20 ft
Right Turn (26x12-12 tires): 21 ft
Left Turn (23x10.50-12 tires): 18 ft
Left Turn (26x12-12 tires): 19 ft
Operating Weight
Basic unit weight w/o plow blade or other options: 3310 lb
H400 weight boom, chain or restraint bar: 310 lb
Reel carrier weight w/o reel: 100 lb

PLOW BLADES
Plow blade are available for 12 in (305mm), 18 in (450mm), or 24 in (610 mm) blade depths.
Both pull and feed plow blades are available. Feed chutes are available with 4-to-1 or 10-to-1 bend ratio.

POWER TRAIN
Ground Drive
Transmission: Hydrostatic drive, infinitely variable from zero to maximum, lever operated speed and direction controls
Brake: Speed / direction control brakes machine hydraulically when moved to neutral position
Parking brake: Mechanical disc and caliper, hand-operated.
Differentials - Dana 44, limited slip
Tires
23x10.50-12 tubeless 4-ply
26x12-12 tubeless 4-ply
26x12-12 4-ply with tubes

ATTACHMENT DRIVE
Plow: Hydrostatic
Trencher: Hydrostatic

POWER
Engine: Caterpillar 3013C
Fuel: Diesel
Injection: Indirect
Cooling medium: Liquid
Aspiration: Natural
Number of cylinders: 3
Displacement: 91.5 cubic inches
Bore: 3.31 in
Stroke: 3.54 in
Gross power @ 3600 rpm: 31.4 hp
Maximum governed speed (no load): 2600 rpm
Estimated net power rating: 29 hp

HYDRAULIC SYSTEM
Ground drive pump capacity @ 2500 rpm: 15 gpm
Ground drive relief valve setting: 4000 psi
Attachment pump capacity @ 2500 rpm: 17 gpm
Attachment relief valve setting: 3000 psi
Auxiliary pump capacity @2500 rpm: 7 gpm

FILTRATION
Charge pump, 25 psi (2 bar) bypass: 10 micron nominal
Return full flow, 15 psi (1 bar) bypass: 10 micron nominal

FLUID CAPACITIES
Fuel tank: 8.8 gal
Engine oil: 5.8 qt
Hydraulic reservoir: 14 gal
Hydraulic system: 16 gal

BATTERY
Group 26/26R/70; cold crank at 0 ° F (18 ° C) 700 amps; SAE reserves capacity 85 minutes
Auxiliary pump relief valve setting 2000 psi