Diese Seite wurde mit Google Übersetzer übersetzt
Gerätespezifikationsbibliothek
Grundlegende Modellinformationen
-
Hersteller:Ditch Witch
-
Modell:5110
Hersteller anzeigen Modelle anzeigen
Spezifikationen
Zusätzliche Information
Angle of approach: 22.5°
Overhang beyond tire: .75 in
Height: 96.5 in
Length - transport: 122 in
Wheelbase: 63.5 in
Width: 69.5 in
Tread: 50.3 in
GENERAL
Ditch Witch model 5100 tractor, 4-wheel drive, rigid frame,
ground drive through rubber tires, conventional two wheel power steering
(optional 4-wheel steering) basic riding unit.
OPERATIONAL
Vehicle speeds @ 2630 rpm with 29 x 12-15 tires
Maximum transit forward
1st gear: 2.1 mph
2nd gear: 3.6 mph
3rd gear: 6.1 mph
4th gear: 8.6 mph
Maximum reverse: 1.8 mph
Crowd speed, full load (Max. only. Actual speed varies with soil and job conditions): 0-45 fpm
Max. allowable operating weight(optional tires): 10,000 lb
Basic unit weight w/o attachments with 29 x 12.0-15, 4-ply tires and standard backfill blade: 4,950 lb
BACKFILL BLADE
Standard: 4-way hydraulic lift angle
Blade width: 64 in
Blade height: 13 in
Lift height above ground (standard tires): 15.5 in
Blade drop below ground (standard tires): 6.5 in
Maximum swing angle (left/right): 27.5°
Tilt angle (up/down): 20°
POWER TRAIN
Ground drive:
Transmission (mechanical): 4 speeds forward, 1 reverse with gear drive to axles
Ground drive (hydraulic): Hydraulic drive infinitely variable from zero to maximum
forward and reverse through gear reduction to axles
Clutch: Automotive spring-loaded foot-operated friction drive
Service brake: Disc, foot operated
Parking brake: Disc, hand operated
Tires
29 x 12.50-15 4 ply bar lug, 1780 lb @ 20 psi, 807 kg @ 138 kPa
31 x 15.50-15 4 ply bar lug, 2275 lb @ 20 psi, 1031 kg @ 138 kPa
31 x 15.50-15 8 ply bar lug, 3415 lb @ 40 psi, 1549 kg @ 276 kPa
31 x 15.50-15 4 ply turf tread, 2275 lb @ 20 psi, 1031 kg @ 138 kPa
Trencher Drive
Transmission: 4speeds, 1 reverse through shock absorbing clutch belt drive to right angle drive to head shaft
Clutch: Automotive spring-loaded foot operated friction drive
POWER
Engine: Deutz F3L912
Fuel: Diesel
Cooling medium: Air
Number of Cylinders: 3
Displacement: 172.5 cubic inches
Bore: 3.94 in
Stroke: 4.72 in
Engine manufacturer's gross horsepower rating: 58 hp
Max. governed speed as installed (no load): 2630 rpm
Flywheel power (full load): 52.5 hp
HYDRAULIC
Pump capacity setting (w/M552 attachment): 2500 psi (17237.5 kPa) per section
Pump capacity setting (w/all other attachments): 2000 psi (13790 kPa) per section
Crowd relief valve setting
Normal: 2250 psi
Normal (M530/M552): 2750 psi
High: 2000 psi
Filtration: Return full flow with bypass valve 10 micron nominal
FLUID CAPACITIES
Fuel tank: 13 gal
Engine oil including filter: 8.5 qt
Transmission: 7.5 pt
Gear Box: 14 qt
Hydraulic system: 19.5 gal
Differential
Rockwell: 15 qt
Dana 70 (front): 8.5 pt
BATTERY
Group 31H SAE Res. Cap. 120 min. SAE cold crank @ 0° F (-18°C), 700 amp
Diese Information dient nur zu Informationszwecken. HDD Broker LLC kann die Richtigkeit oder Vollständigkeit dieser Informationen nicht garantieren. Diese Informationen können vom Hersteller geändert werden. Einige Spezifikationen können sich je nach Modelljahr unterscheiden.