Diese Seite wurde mit Google Übersetzer übersetzt
Gerätespezifikationsbibliothek
Grundlegende Modellinformationen
-
Hersteller:American Augers
-
Modell:MCM-1800
Hersteller anzeigen Modelle anzeigen
Zusätzliche Information
DIMENSIONS
Length: 16' (4877 mm)
Width: 7'3" (2210 mm)
Height: 7'5" (2260 mm)
Trailer Mounted:
Length: Varies with trailer selection
Width: 8'6" (2590 mm)
Height: 10' (3050 mm)
ELECTRICAL
Generator:
-480 volt 3 phase - 40 kW intermittent, 36 kW continuous
Auxiliary Electrical:
-120/208 volt AC, 6 kva
-2 x Duplex Outlets with Ground Fault interrupter
-2 x 500 watt quartz work lights
ENGINE
Engine: Caterpillar diesel 4 cylinder naturally aspirated
Rating: 60 HP (44.6 kW) continuous duty
Fuel Capacity: 42 US gallons (160 litres)
TANKS
Screen Tank: 600 US Gallons (2270 litres)
Clean fluid/mixing:
-1200 US Gallons (4540 litres)
-With clean out covers, fluid level sight gauge.
-Epoxy coated interiors.
SCREEN
Tandem linear motion shaker (40 x 60 inch, 1219 x 1524 mm) driven by electric motor, fold-down discharge chute for cuttings. Various screen mesh sizes available.
FLUID HANDLING SYSTEM
Rated Capacity: Up to 250 GPM (945 lit/min)
Circulating Pump: Centrifugal, electric driven, 3x4
Desilting: Five inch cones (3 units) with manifolds and valves
Mud Agitation: Two jets
Length: 16' (4877 mm)
Width: 7'3" (2210 mm)
Height: 7'5" (2260 mm)
Trailer Mounted:
Length: Varies with trailer selection
Width: 8'6" (2590 mm)
Height: 10' (3050 mm)
ELECTRICAL
Generator:
-480 volt 3 phase - 40 kW intermittent, 36 kW continuous
Auxiliary Electrical:
-120/208 volt AC, 6 kva
-2 x Duplex Outlets with Ground Fault interrupter
-2 x 500 watt quartz work lights
ENGINE
Engine: Caterpillar diesel 4 cylinder naturally aspirated
Rating: 60 HP (44.6 kW) continuous duty
Fuel Capacity: 42 US gallons (160 litres)
TANKS
Screen Tank: 600 US Gallons (2270 litres)
Clean fluid/mixing:
-1200 US Gallons (4540 litres)
-With clean out covers, fluid level sight gauge.
-Epoxy coated interiors.
SCREEN
Tandem linear motion shaker (40 x 60 inch, 1219 x 1524 mm) driven by electric motor, fold-down discharge chute for cuttings. Various screen mesh sizes available.
FLUID HANDLING SYSTEM
Rated Capacity: Up to 250 GPM (945 lit/min)
Circulating Pump: Centrifugal, electric driven, 3x4
Desilting: Five inch cones (3 units) with manifolds and valves
Mud Agitation: Two jets
Diese Information dient nur zu Informationszwecken. HDD Broker LLC kann die Richtigkeit oder Vollständigkeit dieser Informationen nicht garantieren. Diese Informationen können vom Hersteller geändert werden. Einige Spezifikationen können sich je nach Modelljahr unterscheiden.