Diese Seite wurde mit Google Übersetzer übersetzt
Gerätespezifikationsbibliothek
Grundlegende Modellinformationen
-
Hersteller:Ditch Witch
-
Modell:JT520
-
Rig Größe:0 - 10,000 lbs Pullback
Hersteller anzeigen Modelle anzeigen
Spezifikationen
Zusätzliche Information
UPDATED JANUARY 2016
DIMENSIONS
Overall machine length*: 117 in (2.97 m)
Overall machine width*: 35.5 in (902 mm)
Overall machine height*: 66.5 in (1.69 m)
Drilling unit operating mass*: 3150 lb (1430 kg)
Entry angle: 11° to 16°
Angle approach: 18°
Angle departure: 18°
POWER PIPE
Length of drill pipe (nominal)*: 59" (1.50 m)
Diameter of drill pipe tool joint end: 1.75" (44.5 mm)
Diameter of drill pipe: 1.1" (28 mm)
Minimum bend radius: 70 ft (21.3 m)
Weight of drill pipe (lined): 16 lb (7.25 kg)
OPERATION
Spindle speed*: 195 rpm
Spindle torque*: 500 ft/lb (678 Nm)
Carriage thrust travel speed*: 142 fpm (43.3 m/min)
Carriage pullback travel speed: 142 fpm (43.3 m/min)
Thrust force*: 4500 lb (20 kN)
Pullback force*: 5000 lb (22.2 kN)
Bore diameter: 2.5 in (63.5 mm)
Backream diameter: 4 in (102 mm)
Ground travel speed, maximum*
-Forward: 1.53 mph (2.46 km/h)
-Reverse: 1.53 mph (2.46 km/h)
POWER
Engine: Kubota D1105-T-E3B
Fuel: Diesel
Cooling medium: Liquid
Injection: Indirect
Aspiration: Turbocharged
Cylinders: 3
Displacement: 68.6 in3 (1.12 L)
Bore: 3.07 in (78 mm)
Stroke: 3.09 in (78.5 mm)
Manufacturer's gross power rating **: 33 hp (24.6 kW)
Rated speed: 3000 rpm
Emissions Compliance: EPA Tier 4i (EU Stage IIIA)
DRILLING FLUID SYSTEM (ON-BOARD)*
Max drilling fluid pressure: 500 psi (34.5 bar)
Max drilling fluid flow: 5 gpm (18.9 L/min)
FLUID CAPACITIES
Hydraulic reservoir: 8 gal (30 L)
Fuel Tank: 10 gal (38 L)
BATTERY
SAE reserve capacity rating: 85 min
SAE cold crank @ 0° F (-18° C): 525 A
Specifications are general and subject to change without notice.
DIMENSIONS
Overall machine length*: 117 in (2.97 m)
Overall machine width*: 35.5 in (902 mm)
Overall machine height*: 66.5 in (1.69 m)
Drilling unit operating mass*: 3150 lb (1430 kg)
Entry angle: 11° to 16°
Angle approach: 18°
Angle departure: 18°
POWER PIPE
Length of drill pipe (nominal)*: 59" (1.50 m)
Diameter of drill pipe tool joint end: 1.75" (44.5 mm)
Diameter of drill pipe: 1.1" (28 mm)
Minimum bend radius: 70 ft (21.3 m)
Weight of drill pipe (lined): 16 lb (7.25 kg)
OPERATION
Spindle speed*: 195 rpm
Spindle torque*: 500 ft/lb (678 Nm)
Carriage thrust travel speed*: 142 fpm (43.3 m/min)
Carriage pullback travel speed: 142 fpm (43.3 m/min)
Thrust force*: 4500 lb (20 kN)
Pullback force*: 5000 lb (22.2 kN)
Bore diameter: 2.5 in (63.5 mm)
Backream diameter: 4 in (102 mm)
Ground travel speed, maximum*
-Forward: 1.53 mph (2.46 km/h)
-Reverse: 1.53 mph (2.46 km/h)
POWER
Engine: Kubota D1105-T-E3B
Fuel: Diesel
Cooling medium: Liquid
Injection: Indirect
Aspiration: Turbocharged
Cylinders: 3
Displacement: 68.6 in3 (1.12 L)
Bore: 3.07 in (78 mm)
Stroke: 3.09 in (78.5 mm)
Manufacturer's gross power rating **: 33 hp (24.6 kW)
Rated speed: 3000 rpm
Emissions Compliance: EPA Tier 4i (EU Stage IIIA)
DRILLING FLUID SYSTEM (ON-BOARD)*
Max drilling fluid pressure: 500 psi (34.5 bar)
Max drilling fluid flow: 5 gpm (18.9 L/min)
FLUID CAPACITIES
Hydraulic reservoir: 8 gal (30 L)
Fuel Tank: 10 gal (38 L)
BATTERY
SAE reserve capacity rating: 85 min
SAE cold crank @ 0° F (-18° C): 525 A
Specifications are general and subject to change without notice.
Diese Information dient nur zu Informationszwecken. HDD Broker LLC kann die Richtigkeit oder Vollständigkeit dieser Informationen nicht garantieren. Diese Informationen können vom Hersteller geändert werden. Einige Spezifikationen können sich je nach Modelljahr unterscheiden.