Diese Seite wurde mit Google Übersetzer übersetzt
Gerätespezifikationsbibliothek
Grundlegende Modellinformationen
-
Hersteller:Vermeer
-
Modell:D50x100
-
Rig Größe:30,001 - 50,000 lbs pullback
Hersteller anzeigen Modelle anzeigen
Spezifikationen
Zusätzliche Information
DIMENSIONS
Length: 21' (6.4 m)
Width: 93" (236 cm)
Height: 96" (244 cm)
Weight: 29,200 lbs (13,245 kg) with 270' (82.3m) of 3.5" (8.9 cm) rod
Hydraulic pipe vise: Yes
Transport speed: 2.1 mph (3.4 km/h)
Rod box on rack: Yes - 300' (91.4 m)/2.875" (7.3 cm) rod, 270' (82.3 m)/3.5" (8.9 cm) rod
Automated Rod Loader: Yes
DRILL PIPE
Firestick
One-piece forged design: Yes
Length: 15' (4.6 m)
Diameter: Standard - 3.5" (8.9 cm), Optional - 2.875" (7.3 cm)
Feet of rod/90 degrees: Standard - 310' (94.5 m), Optional - 265' (80.8 m)
Weight: Standard - 230 lbs (104 kg), Optional - 195 lbs (88 kg)
Max Torque: Standard - 10,000 ft-lb (13,560 Nm), Optional - 9,000 ft-lb (12,204 Nm)
OPERATIONAL
Maximum Spindle Speed: 80/106/160 RPM
Maximum Spindle Torque: 10,000 ft-lb (13,560 Nm) @ 80 RPM, 7,600 ft-lb (10,300 Nm) @ 106 RPM, 3,300 ft-lb (4,470 Nm) @ 160 RPM
Actual Thrust/Pullback: 38,000/49,600 lbs (17,237/22,499 kg)
Electrical System: 12 Volt DC
BORE
Minimum bore diameter: 4.5" (11.4 cm)
Drill head works with all well-known Detection systems
Maximum backreamed diameter and bore length varies - Dependent on ground condition.
POWER SOURCE
Engine: Cummins 6BTA5.9
HP: 185 HP
DRILLING FLUID SYSTEM
Maximum Flow: 150 GPM (567 LPM)
Maximum Pressure: 1000 PSI (69 bar)
Length: 21' (6.4 m)
Width: 93" (236 cm)
Height: 96" (244 cm)
Weight: 29,200 lbs (13,245 kg) with 270' (82.3m) of 3.5" (8.9 cm) rod
Hydraulic pipe vise: Yes
Transport speed: 2.1 mph (3.4 km/h)
Rod box on rack: Yes - 300' (91.4 m)/2.875" (7.3 cm) rod, 270' (82.3 m)/3.5" (8.9 cm) rod
Automated Rod Loader: Yes
DRILL PIPE
Firestick
One-piece forged design: Yes
Length: 15' (4.6 m)
Diameter: Standard - 3.5" (8.9 cm), Optional - 2.875" (7.3 cm)
Feet of rod/90 degrees: Standard - 310' (94.5 m), Optional - 265' (80.8 m)
Weight: Standard - 230 lbs (104 kg), Optional - 195 lbs (88 kg)
Max Torque: Standard - 10,000 ft-lb (13,560 Nm), Optional - 9,000 ft-lb (12,204 Nm)
OPERATIONAL
Maximum Spindle Speed: 80/106/160 RPM
Maximum Spindle Torque: 10,000 ft-lb (13,560 Nm) @ 80 RPM, 7,600 ft-lb (10,300 Nm) @ 106 RPM, 3,300 ft-lb (4,470 Nm) @ 160 RPM
Actual Thrust/Pullback: 38,000/49,600 lbs (17,237/22,499 kg)
Electrical System: 12 Volt DC
BORE
Minimum bore diameter: 4.5" (11.4 cm)
Drill head works with all well-known Detection systems
Maximum backreamed diameter and bore length varies - Dependent on ground condition.
POWER SOURCE
Engine: Cummins 6BTA5.9
HP: 185 HP
DRILLING FLUID SYSTEM
Maximum Flow: 150 GPM (567 LPM)
Maximum Pressure: 1000 PSI (69 bar)
Diese Information dient nur zu Informationszwecken. HDD Broker LLC kann die Richtigkeit oder Vollständigkeit dieser Informationen nicht garantieren. Diese Informationen können vom Hersteller geändert werden. Einige Spezifikationen können sich je nach Modelljahr unterscheiden.