Diese Seite wurde mit Google Übersetzer übersetzt

Gerätespezifikationsbibliothek

Grundlegende Modellinformationen

  • Hersteller:
    Vermeer
  • Modell:
    D7x11A
  • Rig Größe:
    0 - 10,000 lbs Pullback

Hersteller anzeigen Modelle anzeigen Zurück zum überblick

Spezifikationen

Fuel Type Diesel
Fuel Tank Capacity 8 gal 30 L
Fluid Tank 55 gal 208 L
Width 35.5" 90 cm
Manufacturer's Gross HP Rating 37.5 HP 28 kw
Hydraulic Tank Capacity 13 gal 49 L
Type Firestick I/II
Length 144" 366 cm
Max Speed 3200 RPM 3200 RPM
Length 6' 1.8 m
Max Spindle Speed 120 RPM 120 RPM
Pump Output 9 gpm
Pullback 7800 lbs 3538 kg
Max Carriage Speed 119 ft/min 3636 m/min
Min Bore Diameter 2" 5 cm
Rod Carrying Capacity 198' 60.4 m
Thrust 7800 lbs 3538 kg
Ground Drive Speed 1 mph 1.6 km/hr
Max Flow 9 GPM 34 LPM
Drill Stem 6' 0''
Max Pressure 500 psi 34 bar
Weight 4850 lbs 2200 kg
Pipe Diameter 1.66" standard 4.2 cm standard
Height 66" 188 cm
Weight 23 lb (10 kg 23 lb (10 kg
Entry Angle 32 degrees
Make and Model Kubota D-1505
Min Bend Radius 95.5' 29.1 m
Engine Kubota
Max Spindle Torque 1100ft-lbs 1489 Nm
Pump Pressure 500 psi
Torque 1100ft-lbs 1489 Nm

Zusätzliche Information

-*2015 NOVEMBER*-

GENERAL DIMENSIONS AND WEIGHTS
Weight: 4850 lbs (2199.9 kg)

ENGINE
Make and Model: Kubota- V-1505-B
Fuel Type: Diesel
Gross Horsepower: 37.5 hp (28 kw)
Net Horsepower: 33.5 hp (25 kw)

OPERATIONAL
Pullback: 7800 lbs (3538 kg)
Maximum Carriage Speed at Maximum Engine RPM: 11 9 ft/min (36.3 m/min)
Maximum Spindle Torque (Low at Maximum Engine RPM): 1100 ft-lb (1491.4 Nm)
Maximum Spindle Speed at Max Engine RPM: 120 rpm
Minimum Bore Diameter: 2" (5.1 cm)
Maximum Ground Drive Speed at Maximum Engine RPM: 1 mph (1.6 km/h)
Drill Rack Angle: 32 deg

FLUID CAPACITIES
Fuel Tank: 8 gal (30.3 L)
Engine Crankcase with Filter: 6 qt (5.7 L)
Hydraulic Tank: 13.8 gal (52.2 L)

DRILLING FLUID SYSTEM OPTION ONE
Maximum Flow: 9 gpm (34.1 L/min)
Maximum Pressure: 500 psi (34.5 bar)

FEATURES
Breakout System: Hydraulic open-top
Stakedown System: Stationary; dual stakes

-*2004*-

DRILL UNIT
Length: 144" (366 cm) or 166" (422 cm) with water tank
Width: 35.5" - 49" (90 - 124 cm)
Height: 66" (188 cm)
Weight: 4850 lbs (2200 kg) with 198' (60 m) of drill stem
Open Top Vise: Yes
Transport Speed: 1 mph (1.6 kmh)
Stakedown System: Yes
Drilling Lights: Yes

OPERATIONAL
Max Spindle Torque: 1100 ft-lbs (1489 Nm)
Actual Pullback: 7800 lbs (3538 kg)
Actual Thrust: 7800 lbs (3538 kg)
Maximum Spindle Speed: 120 RPM
Electrical System: 12-volt

WATER SYSTEM
Maximum Flow: 9 gpm (34 Lpm)
Maximum Pressure: 500 psi (34 bar)
Onboard tank: 55 gal (208 L) (optional)

POWER SOURCE
Make and Model: Kubota- D-1505
Manufacturer's Gross HP Rating: 37.5 HP (28 kw)
Maximum Governed Speed: 3200 RPM

DRILL STEM
One-piece forged design: Yes
Length: 6' (1.8 m)
Pipe Diameter:
-1.66" (4.2 cm) standard
-1.32" (3.3 cm) optional
Minimum bend radius:
-95.5' (29.1 m) with 1.66" (4.2 cm) stem
-57.3' (17.5 m) with 1.32" (3.3 cm) stem
Weight:
-23 lbs (10 kg) 1.66" (4.2 cm) stem
-17 lbs (8 kg) 1.32" (3.3 cm)
Firestick stem capacity:
-198' (60.4 m) of 1.66" (4.2 cm) stem
-150' (45.7 m) of 1.32" (3.3 cm) stem

BORE
Maximum Bore Diameter: 2" (5 cm)

FLUID CAPACITIES
Hydraulic Reservoir: 13 gal (49 L)
Engine oil, including filter: 6 qt (6 L)
Fuel Tank: 8 gal (30 L)

FEATURES AND BENEFITS
Feature: Thrust Cylinder
Benefit: The thrust cylinder provides more efficient thrust and pull back power versus hydraulic powered motors and sprocket driven chains used for thrust.

Feature: Open Top Vise
Benefit: No wrenches are needed to couple and uncouple the drill stem. The open top vise is controlled/operated from the operator's station.

Feature: 55-Gallon On-Board Water Tank
Benefit: The on-board tank provides clean water supply for easy clean up and can also supply drilling fluid for smaller jobs.

Feature: FIRESTICK Drill Stem
Benefit: Available in two different drill stem options, Firestick Drill stem offers flexibility to match individual contractors' needs. They are constructed with a premium blend of alloy steel, provide excellent strength and flexibility, and have memory characteristics to better withstand bending and rotational torque forces encountered during the drilling process. Feature precision-machined threads that are designed specifically to help withstand the rigors of directional boring.

Feature: Dual Thrust/Rotation Controls
Benefit: The operator has complete and precise control over each function.

Hersteller anzeigen Modelle anzeigen Zurück zum überblick

Diese Information dient nur zu Informationszwecken. HDD Broker LLC kann die Richtigkeit oder Vollständigkeit dieser Informationen nicht garantieren. Diese Informationen können vom Hersteller geändert werden. Einige Spezifikationen können sich je nach Modelljahr unterscheiden.

HDD Broker verwendet Cookies und sammelt persönliche Informationen auf seinen Websites.

Weitere Informationen finden Sie in den Datenschutzbestimmungen und Cookie-Richtlinien von HDD Broker. Durch Klicken auf "Ich stimme zu" geben Sie an, dass Sie Ihre Browsereinstellungen an Ihre Präferenzen angepasst haben und der Verwendung von Cookies durch HDD Broker zustimmen.

x